Large Bubble Machine Views

General Goods

Voltage: AC110V-250V/50Hz-60HzPowder: 300WWeight: 20KGBubble Oil Container：2.5LBlowing Height: 10MBubble Output: 600 cubic metersControl mode: Remote Control Large bubble machine has been improved, and can blow abundant no color or scent bubble In the light millions of colorful crystal bubbles make you in a fairy worldSize: 45 X 39 X 41 cm Weight: 15 KGPlace of Origin:Guangdong in ChinaModel No:BML300Brand Name:Grand PlanPayment Terms:T/T(Bank Transfer),

The V-8211 Bubble Machine is designed for applications that require a large volume of bubbles for an extended period of time. It features a removable, self dispensing fluid tank with a 2.5 liter capacity for longer operation. The large built-in fan blows the bubbles upward for better room coverage. The V-8211 is well suited for stage use, retail promotion, photography studios, as well as club and mobile DJ applications. Dim: 16 "x10.75a"x11=" 13 lbs

Still, this machine is not without promise. I found that once the bubble had started to form if I covered up the air inlets the force of the fan was reduced enough so that the bubble was less likely to burst. The architecture of the machine makes is easy to install a plastic tube that would allow helium to be added to the air used to inflate bubbles so that they would float instead of sink. Finally, using a larger fog machine to supply all the filling needed to inflate a bubble, which would make the bubbles appear more solidly filled with smoke. Combining both of these last two ideas would enable someone to create smoke-filled bubbles that floated. The price to pay for this, besides the expense of the helium, a fog machine and various plumbing fixtures, is that the resulting unit would be large, heavy, and awkward to use.

The 12-inch tall bubble machine has many new and innovative features. First, and most importantly, it has a built-in fan that blows the bubbles straight up instead of forward. Because of this the bubbles remain in the air much longer. Second, it has a large base filled with bubble solution that not only provides enough bubble juice for up to an hour of continuous use, but acts as a heavy base to stabilize the bubble machine. All this goodness comes at a price. The bubbler has to be flushed with warm water after every use. If not, bubble solution could dry out and gum up the pump used to move the bubble solution from the reservoir to the bubble wands. As of Summer or 2006, this machine is very hard to find either on the west coast or even on the Internet.