17 Mm Allen Wrench Views

• General Goods

Loosen the pinch bolts on the bottom of the lower fork sliders with a 12 mm socket and a socket wrench. Loosen the front axle nut with a 17 mm Allen wrench. Loosen the front brake caliper mounting bolts with a 14 mm socket. Place your ZRX 1100 on a service stand and lift the front wheel off the floor.

Unscrew the brake caliper mounting bolts from the lower fork sliders, using a 14 mm socket. Lift the calipers off the front wheel's brake rotors. Unscrew the front axle nut with a 17 mm Allen wrench, then pull the axle out of the front fork and wheel. Remove the front fender from the lower fork sliders, using a 4 mm Allen wrench

Unscrew the bolt from the bottom of the fork leg with a 6 mm Allen wrench to free the piston rod. Pull the piston rod out of the fork leg. Pull the rubber boot off the fork's lower slider to reveal the fork seal and its C-clip. Remove the C-clip with a flat screwdriver. Push the fork tube into the slider, then pull the tube forcefully against the fork seal. Repeat until the seal pops out of the lower slider, then slip the fork seal off the top of the fork tube.

Reinsert the piston rod into the fork tube. Screw the bolt into the bottom of the lower slider with a 6 mm Allen wrench to hold the piston rod in place. Push the fork tube into the slider and pour up to 16 ounces of SAE 10W fork fluid into the tube. Stroke the tube up and down to distribute the fork fluid.

allen hex wrench, allen key wrench, allen wrench sockets, ar 15 wrench, 02 sensor wrench, cleat wrench, f connector wrench, the monkey wrench, wrench organizers, wrench storage, quick wrench, rubber wrench, 1911 bushing wrench, angle grinder wrench, crankshaft pulley wrench, shower drain wrench, tool wrench shirt, pipe wrench plumbing, left handed monkey wrench, allen & ginter,